Product Overview: 

 AS-0061 is based on infrared technology, automation products, high sensitivity, reliability, widely used in various auto-sensing electrical equipment. 

 Features: 

 1. Automatic induction: to enter the sensing range of the output high, people leave the sensor range of the automatic delay off high, output low. 
 2. Photosensitive control (optional, not factory installed): sensitive controls can be set during the day or light intensity without induction. 
 3. Two Trigger: (can be selected by jumpers) 
 a. must not repeat the trigger: the sensor output high, the delay time is over, the output will automatically from high to low; 
 b. trigger mode can be repeated: the sensor output high after the delay period, if its sensing range of human activities, the output will remain high until after the delay to leave the high-power level goes low (sensor module detects the human body every activity will be automatically extended after a delay time, and the final event of the time the starting point for the delay time). 
 4. With induction blocking time (the default setting: no blocking time): induction module delay is over (that is, to stop output) can be followed by a blockade set period of time, during this time period does not accept any inductive sensor signal . This feature can have a "sensor output time" and "blocking time" the interval between the work can be applied to interval detection products; the same time this feature can inhibit the process of load switching for a variety of interference. (This time can be set at zero seconds - several seconds). 
 5. Working voltage range: the default voltage DC3.8V-20V 
 6. Micropower: quiescent current "50 microamps, especially for battery-powered appliances. 
 7. Output level signal: easy docking with the various types of circuits. 

 Parameters: 

 1. Operating voltage: DC5V-20V; 
 2. Static power consumption: "50 microamps; 
 3. Level output: high-3.3V (the other voltage to be made); standby output is 0V; 
 4. Delay time: the scope of a few tenths can be made - ten minutes adjustable; 
 5. Embargo time: The scope of a few tenths - tens 
 6. Trigger: L can not be repeated; H can be repeated; 
 7. Sensing range: ≤ 110 ° cone angle, 7 meters. (Sensing distance of the lens used by a specific decision can be made tens of centimeters to 7 meters). 
 8. Working temperature: -20-- +40 degrees; 
 Dimensions: 24 * 32mm, the screw hole distance 32.5mm; 
 10. Induction lens size (diameter): 23mm (default); otherwise: 12.7mm; 8mm optional.